Dental Matrix Bands
- 특수 강화 마티 리얼은 적절한 강도와 탄력성을 보장합니다
- 좋은 탄력과 강인함, 좋은 클램핑 력, 반복적 인 사용 후 무의미한
- 더 큰 곡률은 치아를 더 안정적으로 감싸고 맞출 수 있습니다.
- 수지 재료는 좋은 탄력성과 탄력성을 가지고 있습니다, 변형되지 않습니다
- 자동 클레이브 가능
설명
매트릭스 밴드는 치과 복원 및 치열 교정 치료에 사용되는 스테인레스 스틸 또는 의료 등급의 플라스틱 장치입니다.. 그들은 임상 절차 중에 회복 재료 성형 및 형성을 돕기 위해 치아 주변에 임시 격리 벽을 만듭니다..
매트릭스 밴드는 치아 주위의 명확한 경계와 모양을 제공합니다., 수복물을 지정된 영역으로 정확하게 채울 수 있도록, 이상적인 치아 형태 복원을 초래합니다.
매트릭스 밴드 카테고리
GD-5691
패키지: 144 PC/백
지원 134 temperature 고온 소독
| 넓은: #2 두께: 0.04mm(0.0015") |
| 넓은: #2 두께: 0.05mm(0.002") |
| 기준, #1 두께: 0.04mm(0.0015") 너비: 6.5mm |
| 기준, #1 두께: 0.05mm(0.002") 너비:6.5mm |
| 넓은 #3 두께: 0.04mm(0.0015") |
| 넓은 #3 두께: 0.05mm(0.002") |
| 넓은 #13 두께: 0.04mm(0.0015") |
| 넓은 #13 두께: 0.05mm(0.002") |
GD-5696 단면 매트릭스 대역
패키지: 50 PC/박스
지원 134 temperature 고온 소독
| No.1, 딱딱한, 소구치, 넓은: 4.5mm, 두께: 0.038mm |
| No.2, 딱딱한, 어금니, 넓은: 5.5mm, 두께:0.038mm |
| No.3, 딱딱한, 큰 어금니, 넓은: 6.5mm, 두께: 0.038mm |
| No.4, 딱딱한, 연장선이있는 Permolar, 넓은: 5mm, 두께:0.038mm |
| No.5, 딱딱한, 확장이있는 어금니, 넓은: 6.5mm, 두께:0.038mm |
| No.6, 딱딱한, 확장이있는 키 큰 어금니, 넓은: 8.5mm, 두께: 0.038mm |
GD-5692
패키지: 144 PC/박스
지원 134 temperature 고온 소독
GD-5694 단면 매트릭스 대역
패키지: 50 PC/박스
지원 134 temperature 고온 소독
낮은 크라운 또는 낙엽 치아, 너비: 3.5mm
소구치, 너비: 4.5mm
어금니, 너비: 5.5mm
확장이있는 어금니, 너비: 6.5mm
GD-5965 단면 매트릭스 대역
패키지: 50 PC/박스
지원 134 temperature 고온 소독
bicuspids, 넓은: 4.5mm, 두께: 0.038mm
어금니, 넓은: 5.2mm, 두께: 0.038mm
큰 어금니, 넓은: 6.4mm, 두께: 0.038MML
확장이있는 어금니, 넓은: 6.4mm, 두께: 0.038mm
GD-5697 형성 시트 매트릭스
패키지: 20 PC/박스, 50 PC/박스
두께 0.038mm
지원 134 temperature 고온 소독
자동 클레이브 가능한 제품 만
자동 클레이브 가능한 제품 만
밝은 파란색
노란색
녹색
주황색
보라
GD-1.330 안장 금속 매트릭스
패키지: 36 PC/박스
지원 134 temperature 고온 소독
GD-1.310 안장 금속 매트릭스
패키지: 18 PC/박스
지원 134 temperature 고온 소독
작은, 중간, 크기가 큰, 클립
GD-5702 리테이너 및 매트릭스
패키지: 24 PC/박스
지원 121 temperature 고온 소독
| 스테인레스 스틸 |
| 주황색: 넓은 6.2mm, 두께 0.025mm, 날개가 없거나 날개와 함께 |
| 녹색: 넓은 6.2mm, 두께 0.038mm, 날개가 없거나 날개와 함께 |
| 보라: 넓은 4.8mm, 두께 0.038mm, 날개가 없거나 날개와 함께 |
| 빨간색: 넓은 6.2mm, 두께 0.075mm, 날개가 없거나 날개와 함께, mylar |
GD-5698 스틸 매트리리스 밴드
패키지: 1 롤/박스
지원 134 temperature 고온 소독
| 넓은: 5mm, 두께: 0.025mm, 길이: 3중 |
| 넓은: 5mm, 두께: 0.04mm, 길이: 3중 |
| 넓은: 5mm, 두께: 0.05mm, 길이: 3중 |
| 넓은: 6mm, 두께: 0.025mm, 길이: 3중 |
| 넓은: 6mm, 두께: 0.04mm, 길이: 3중 |
| 넓은: 6mm, 두께: 0.05mm, 길이: 3중 |
| 넓은: 7mm, 두께: 0.025mm, 길이: 3중 |
| 넓은: 7mm, 두께: 0.04mm, 길이: 3중 |
| 넓은: 7mm, 두께: 0.05mm, 길이: 3중 |
GD-5699 수지 스트립 롤
패키지: 1 롤/박스
지원 134 temperature 고온 소독
넓은: 9.5mm , 두께: 0.05mm , 길이: 15중
매트릭스 밴드는 환자의 치아에 따라 다른 크기와 모양으로 제공됩니다., 치과 의사가 회복 결과를 정확하게 제어하도록 돕습니다. 매트릭스 밴드는 또한 함께 사용할 수 있습니다 치과 웨지 회복 물질의 두께를 제어합니다, 충전재가 너무 두껍거나 얇아지는 것을 피하기.
의료 기술의 발전으로, 매트릭스 밴드 디자인이 더 똑똑해질 것입니다, 복원의 정확성과 효과를 더욱 높이고 있습니다. 재료 과학의 진화는 또한 더 편안하고 내구성이 뛰어난 새로운 재료로 구성된 매트릭스 밴드로 이어질 것입니다.. 자세한 내용, 저희에게 연락하십시오.
The types of dental matrix bands
Sectional Matrix Bands
Sectional matrix bands are most suitable for Class II and Class III cavity restorations, especially posterior teeth. Their pre-designed arcs can well adapt to the anatomical structure of teeth, creating natural proximal contact and preventing protrusion. They are made of thin and tough stainless steel and can maintain stability in narrow Spaces. This is crucial for the bonding of composite materials used in dental fillings.
Circumferential Matrix Bands
Circular (full circle) matrix bands are used for full coverage restoration and can be applied to crown preparation or post-treatment of large Class I cavities. Made of stainless steel or disposable plastic, it offers 360° surround support to ensure even material placement and repair contours.
Retainer Matrix Bands
It is often used in situations where the preparation of posterior tooth crowns and large-scale restorations require a relatively long surgical time. It also offers 360° surround support and comes with a built-in locking design, eliminating the need for dental wedges to assist in support. They can provide a long-term state maintenance, waiting for the restoration to complete curing.
수지 스트립 롤
Resin Strip Roll is a kind of matrix band made of plastic, which is cut as much as needed. 게다가, resin strip roll is for single use only. There is no need to consider cleaning and disinfecting after use. It is very convenient and saves time.
Why Dentists Trust Our Dental Matrix Bands
- Safe and sterile: Our base tapes all comply with FDA and CE standards. They all undergo strict sterilization before leaving the factory and all support high-temperature and high-pressure sterilization. To prevent cross-infection, it is also recommended that you strictly sterilize before and after each use.
- 내구성: The stainless steel matrix band can resist deformation very well during placement and removal, and can still ensure excellent performance after repeated use.
- High precision: Our matrix band undergoes multiple edge pressing processes to ensure fine, smooth and burr-free edges. It can create a tightly sealed environment, prevent the leakage of dental filling materials, and reduce the incidence of postoperative tooth sensitivity and secondary caries.
How to use dental matrix bands correctly
Select the appropriate type and size:
After the examination, based on the X-ray film and the position of the tooth that needs to be filled. Select the type and size of the dental matrix band. If deep caries of the posterior molars need to be filled, it is best to choose Retainer Matrix Bands, which can maintain a stable state for a long time. If it is a wedge-shaped defect of the premolars, Sectional Matrix Bands can be used in combination with interdental wedges to cooperate. This is because the premolars have a good field of vision and the area of the wedge-shaped defect is relatively small, and only part of the tooth body needs to be surrounded.
Safe placement:
When using the matrix band to stabilize the periodontal area, ensure that it is flush with the gum edge and do not apply excessive force to prevent it from embedding into the gum and causing discomfort to the patient.
Check the contour:
Before filling the restorative material, make sure that the contour surrounded by the matrix band is full and natural, and fits well with the tooth. Prevent overfilling or underfilling from hindering subsequent treatment.
Careful removal:
After the repair material has cured, gently remove the matrix band. Then check the edge area to determine the repair effect.
Solve the pain points related to matrix bands
According to the feedback from our customers, there are three major challenges in optimization
1. Difficulty in spatial adaptation:
During the restoration of interproximal caries of molars, the matrix band either cannot fit into the narrow gap or blocks the operational field of vision when inserted.
Optimization Plan: Our GD-5696 Sectional Matrix Bands have been upgraded and differentiated into six models based on the investigation of the molar size and interdental space of thousands of patients. For detailed specifications, please refer to the table above. It basically covers 90% of the patients’ molar samples. Let you no longer have difficulty choosing when doing interproximal molars restoration.
2. Edge leakage issue:
After filling, it is always found that there are flash or even large protrusions at the junction edge, which requires a lot of time for subsequent polishing and grinding. It was caused by the edge of the formed sheet not being sealed well.
Optimization plan: This kind of problem is mostly due to insufficient locking pressure of the forming sheet. 때때로, when using interdental wedges for assistance, the pressure is uneven, resulting in insufficient edge sealing and overflow of the repair material. The GD-5702 Retainer Matrix Bands we developed later can effectively solve this problem. It can provide 360° surround locking and maintain uniform pressure for a long time.
3. Material durability:
Ordinary stainless steel formed sheets deform after being disinfected three times.
Optimization plan: Upgrade to 316L medical stainless steel material, supporting 134℃ high-pressure steam sterilization, maintaining shape stability after 20 멸균주기.
FAQ
For anterior tooth restoration, the tooth diameter can be referred to: for central incisors, choose the small type (width 5-6mm), and for canines, choose the standard type (6-7mm). The interproximal Spaces of the posterior teeth need to be measured with periodontal probes
- 스테인레스 스틸 (such as GD-5696) : Suitable for the area of the back teeth that bears bite force. A thickness of 0.051mm provides strong support, but it should be noted that the disinfection frequency should not exceed 8 타임스 (otherwise, the edge is prone to deformation).
- Memory alloy (GD-5692) : The preferred choice for aesthetic restoration of anterior teeth, it can be bent at 90° and automatically rebound, especially suitable for cases with complex cervical margin curves.
- Common stainless steel: It is recommended to sterilize at 121℃. After more than 10 cycles, the edge sealing force will decrease by 37%, and it needs to be replaced in time.
- Medical-grade 316L stainless steel: Supports rapid sterilization at 134℃ and maintains shape stability after 20 cycles.
Prefer soft and safe types, such as GD-5699 Resin Strip Roll. It is a matrix band made of resin material and the generated pressure is not too intense. It is suitable for patients like children whose teeth are not fully developed.
